Maltech

Stainless Steel Brake Fittings

For use on custom cars, show cars, hot rods, street cars, 4WD's and even trailers Stainless Steel fittings have many advantages. The appearance benefits of stainless fittings are quit obvious and with a little extra time and a polishing buff they will look absolutely brilliant. Stainless fittings will not deteriorate; they can be polished and re-polished to look the same for many years to come.

Stainless Steel Hydraulic Brake Tube	3/16 ¼ 5/16 3/8
Tube Nuts	3/8 short 3/8 Long 3/8 Female 7/16 ½ 9/16 10 x 1 10 x 1.25 12 x 1
Line Clamps Single with button head fastener	3/16 ¼ 5/16 3/8 ½
Line Clamps Double with button head fastener	3/16 – 3/8 3/16 – 3/16 5/16 – 3/8 ¼ - 3/8 3/8 – 3/8 ½ - 1/2
Banjo Bolts	3/8 x 24UNF 7/16 10 x 1 10 x 1 Short 10 x 1.25
Banjo Bolt brake pressure light switch	10 x 1 3/8
Banjo Adaptors Single Double
T Block	3/8
Bleeder Nipples	10 x 1
Hose Clip
Thru Chassis Fittings	2” with 3/8 Male thread 2.5” with 3/8 Male thread 2” with 3/8 female thread both ends

NEW Maltech Designed

Thru Chassis Fittings

For the Ultimate Brake Hose on your Rod, Maltech has what you have been looking for. This one piece Stainless Steel thru chassis fitting incorporating a crimp shell allows us to crimp the Stainless Braided hose directly to the Thru Chassis Fitting. Not only is it the simplest and neatest way to connect the brake hose, you have eliminated one potential leak point, done away with bulky fittings, made it easy to install and they look absolutely brilliant when fully polished. This thru chassis fitting is supplied as a complete hose assembly with the appropriate length hose and fittings to suit your requirements. Available to suit 2 or 2.5” chassis and supplied with stainless half nut and washer.

Maltech recommends the use of Loctite 567 when using stainless steel fittings.